When purchasing Egw or any other brand from eGoods365.com store, you can be sure that (a) you are purchasing from US based company with the most responsive and friendly customer service; (b) an authentic, not a counterfeit and not a refurbished product.

Introducing the newest addition to the EGW lineup; our Hunter series picatinny scope mount. EGW saw the need for a shorter, lighter, heavy duty, picatinny scope mount and this is what they came up with. After countless hours of prototyping and testing, the Hunter mount was born.

Featuring:

7075 T6 aluminum for an extremely durable yet lightweight construction.

Type III hardcoat anodizing protects the mount from whatever nature can throw at it.

Chamfered edges provide a snag free hunt.

A compact overall length sheds 15% of its weight compared to our other Heavy Duty mounts.

Due to the change in which receivers have #6 and #8 screws from Savage, EGW recommends you remove and measure one of the screws prior to purchasing this scope mount. This will ensure that you receive the correct screws necessary for your specific application. Some Savage guns (like the .338 Lapua or 110 BA) require 8-40 screws. EGW now has mounts drilled for #8 screws available for all MOAs. They also have a #8 Drill Out Kit available for customers who would like to drill the mounts out themselves. If you have questions about your specific firearm, or need help regarding the specific screw size, you should contact Savage Customer Support at (413) 568-7001 or (800) 370-0708 and supply them with your serial number.

This mount is drilled for and provided with 6-48 Hex Head screws.  EGW recommends reviewing their listing below for predrilled #8 mounts if you require #8 screws. Their 8-40 and 6-48 screws utilize the same head design, which allows them to use the same countersink in all of their mounts. If you purchased a mount with the incorrect screws, you can purchase the #8 Drill Out Kit.

Rifles requiring #8 screws (please check your individual rifle to be sure):


10/110 BA Stealth

10/110 Stealth Evolution

110 Scout

110 Wolverine

10 GRS

110 Tactical

110 Tactical LH

110 Tactical Desert

110 Ultralite

Christensen Arms Ridgeline


Screw Diameters


#6 Screws - .13"" diameter

#8 Screws - .16"" diameter


This mount does NOT fit the 212

EGW Savage bases will work with any long action round back Savage rifle with an ejection port. It is also compatible with the Stevens Long Actions.

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger.

Savages without an accu-trigger will require our flat back mount (listed separately).

This mount comes standard with a bevel on both sides making it ambidextrous.

EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

EGW machines these in our shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.

Installation: EGW recommendS 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

This mount fits:


Savage Model 110 Long Action Round Rear Receiver

Savage Model 111 Long Action Round Rear Receiver

Savage Model 112 Long Action Round Rear Receiver

Savage Model 114 Long Action Round Rear Receiver

Savage Model 116 Long Action Round Rear Receiver

Stevens Model 200 Long Action Round Rear Receiver


This mount does not fit:


Savage Edge

Savage Axis

Savage Axis II

Savage Model 25

Savage Long Actions with Flat Rear Receivers

Savage Medium Actions with Flat Rear Receivers

Savage Long Actions Drilled for #8 Screws