When purchasing Egw or any other brand from eGoods365.com store, you can be sure that (a) you are purchasing from US based company with the most responsive and friendly customer service; (b) an authentic, not a counterfeit and not a refurbished product.

EGW red dot sightsare meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. No alterations are required. You can take the mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions


Remove the rear sight*

Install the EGW Sight Mount in the dovetail

Tighten set screw (if applicable)

Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)

Apply blue Loctite to the provided mounting screws

Torque mounting screws to 15in/lbs


Modification of your firearm may nullify the manufacturer's warranty.


This product should be installed and checked by a qualified gunsmith.

No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.


This mount does not fit:


USP Compact (rear sight cut depth is .200"" instead of .160"")

USP Expert

USP Elite

VP9

VP40

P30

P30L

P30SK

HK45

HK45C