When purchasing Egw or any other brand from eGoods365.com store, you can be sure that (a) you are purchasing from US based company with the most responsive and friendly customer service; (b) an authentic, not a counterfeit and not a refurbished product.

EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included.

Installation Instructions


Remove the rear sight*

Install the EGW Sight Mount in the dovetail

Tighten set screw (if applicable)

Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)

Apply blue Loctite to the provided mounting screws

Torque mounting screws to 15in/lbs


Modification of your firearm may nullify the manufacturer's warranty.


This product should be installed and checked by a qualified gunsmith.

No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.


This mount does not fit:


Desert Eagle Post 2017

Baby Desert Eagle Post 2006


Please take note to the Pre 2017 and Post 2017 differences when placing your order.


Pre 2017 rear shelf behind the dovetail is .187"

Post 2017 rear shelf behind the dovetail is .120"