When purchasing Egw or any other brand from eGoods365.com store, you can be sure that (a) you are purchasing from US based company with the most responsive and friendly customer service; (b) an authentic, not a counterfeit and not a refurbished product.

Product Information:

Material: 7075 Aluminum

Coating: Matte Black Hardcoat

Overall Length: 1.811"

Overall Width: .99"

Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw

Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter

Installation Instructions:

1. Remove the rear sight*.

2. Install the EGW Sight Mount in the dovetail.

3. Tighten set screw (if applicable).

4. Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight).

5. Apply blue Loctite to the provided mounting screws.

6. Torque mounting screws to 15in/lbs.

*EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Hardware Details:

- 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights

- 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights

- The screws that are included with this mount require a 5/64'' allen wrench for installation.