When purchasing Egw or any other brand from eGoods365.com store, you can be sure that (a) you are purchasing from US based company with the most responsive and friendly customer service; (b) an authentic, not a counterfeit and not a refurbished product.

Installation Instructions for EGW Red Dot Sight Mount:
1. Remove the rear sight from your gun.
2. Install the EGW Sight Mount from the left to the right, with the muzzle facing forward. The dovetail has a progressive taper to allow for easier installation.
3. Tighten the set screw, if applicable.
4. Place the red dot sight on the EGW Sight Mount. Placing a small piece of paper between the two will make for easier removal and will keep Loctite off of the red dot sight.
5. Apply blue Loctite to the provided mounting screws.
6. Torque the mounting screws to 15in/lbs.
7. Use the provided 2 Button Head Cap Screws for Vortex Viper and Venom Sights, or the 2 Flat Head Cap Screws for Burris FastFire and Docter Sights.
8. The screws that are included require a 5/64'' allen wrench for installation.

Note: This mount does not work with USP Compact, USP Expert, USP Elite, VP9, VP40, P30, P30L, P30SK, HK45, or HK45C. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.